Hardware | ONVIF | Knowledge Base

ONVIF
How to Add Cameras Connected to NVR-(Manual)
Please download the PDF manual by clicking on the link below: How to Add Cameras Connected to NVR Manual
How to Activate ONVIF on the Camera Itself
For some cameras, a separate ONVIF user and ONVIF protocol have to be enabled for proper camera operation in our environment. Cameras from Axis, Hikvision, and some other manufacturers DO require an extra step when the camera is configured for use ...
How to Set Up Port Forwarding Rules
Any ONVIF compliant device (Camera or NVR) can be added to our platform using the ONVIF option. This is a great option for any devices we don't currently have a Plug and Play solution with. Let's start by making sure we have everything we need. 1. ...
How to Enable ONVIF on Hikvision Cameras
This guide is based on you knowing the IP address of your Camera. Summary: Enable Onvif on Hikvision cameras: Navigate to the camera IP address – Default IP is 192.168.0.64 Login in to cameras web interface. Go to Configuration -> Network > Advanced ...
Connecting Your Camera to the Cloud through Port Forwarding/ONVIF option
Make sure that the camera has the latest firmware updates installed. You will want to configure the Network settings of the camera, make sure to use appropriate Gateway and DNS settings for your local network, check HTTP and RTSP port settings. We ...

Popular Articles
How to Add a Camera using Generic Option
Virtually any IP camera that has an RTSP stream can be added to our system. In order to add a camera to our system using the Generic option, you will need to configure a port forwarding rule to allow our servers to reach the camera's RTSP stream. The ...
How can I become a Beta Tester?
Enterprise customers are automatically eligible for early beta access to new features in development. Beta features are not fully baked! Don't hold it against us if your computer starts to make funny noises... just kidding! (sort of )
My internet is not stable, how would I prevent loss of footage?
The best solution will depend on the number of cameras and the expected storage duration. Some of the options you can use include the installation of NVR on the premises or installing SD cards in each camera. Contact your local integrator to ...
How do I Test Signals on Bounty Hunter Web
How to Test Signals in Bounty Hunter After you have added a camera, you can test the signals by going in to the chosen Site. In the Cameras tab you will see the "Enable Signal Test" button, You can use this button to turn your cameras on to test ...
Using the IPVM system to design your site.
The IPVM calculator is a fantastic tool for you to use when setting up a new site to ensure maximum coverage based on area and camera capabilities. This will be your guide to utilizing this tool. Step 1: Login into your IPVM and then click ...

ONVIF