Preparing a Camera for Push Module Addition
Preparing any Camera for the addition of P&P Modules is quite simple. You require to:
- Unpack the Camera from the box
- Have access to a Powered Switch, Plug Camera into Switch using POE cable
- Ensure the Switch is plugged into a Router using a POE Cable
- Have access to a computer which is plugged into the same router or network (on wifi and same network also ok, but less reliable, sometimes has problems)
Related Articles
Uniview Push Module Installer
Uniview Compatibility List Your device may be compatible even if it is not on the list. Please contact us if you have a device that does not appear on the list. C1L-2WN IPC2122LB-DSF28KM IPC2122LB-DSF40KM IPC2122LR3-F40-E IPC2122LR3-PF28M-D ...Uniview Models Compatible with Push Module Installer
Download and Install Guide: Uniview Push Module Installer Uniview Compatibility List Your device may be compatible even if it is not on the list. Please contact us if you have a device that does not appear on the list. C1L-2WN IPC2122LB-DSF28KM ...Axis Camera Push Modules
Depending on the camera model and architecture a different version of the push module will be available. Instructions to determine the correct version of the push module for your camera can be found: determine camera architecture for axis cameras in ...Local Security Push Module Overview
Local Security has a unique PUSH Module solution, allowing cameras to connect directly to the cloud and avoid security vulnerabilities. This is our simple Plug&Play setup where customers only need to plug a camera into a router and it makes the cloud ...Adding your Push Module Camera to your Customer
Once you have added our push module to your camera, you can follow the steps below to add the camera to the cloud platform. Navigate to vmsadmin.localsecurity.org Log in using your previously created credentials (Ask your Integrator or Account ...