This is a full description of all the options on the Integrator Camera Module Interface

1. Integrator Camera Module -> Location of the module
2. Add Button -> Register a new Camera into your integrator account
3. P&P Cameras Tab -> See Below
4. Customers Cameras Tab -> See Below
5. Deleted Cameras Tab -> See Below

 

P&P CAMERA TAB

1. P&P Camera tab -> Used to view and modify an Integrator P&P Cameras that are currently registered
2. Entries per page ->  Choose how many Cameras you see on the page, choice of 10/25/50/100
3. Reset Filters ->   You can filter P&P Cameras by multiple types. This button resets those back to default 
4. Columns ->Choose which columns you can see on the P&P Tab 
   • Enabled -> See Below
   • Thumbnail -> See Below
   • P&P Status -> See Below
   • Camera ID -> See Below
   • Camera Name -> Descriptive name of the camera chosen
   • Model -> Model Number of Camera
   • Video Status -> See Below
   • Object Detection -> Specifics of Active Advanced Analytics active with the camera
   • Registration Code -> See Below
   • Assigned to -> See Below
   • Plan Name -> See Below
   • Plan Type -> See Below
   • Modified at -> See Below
5. Reset Settings ->  Resets Column Settings to default 
6. Refresh -> Refresh Page to see any changes 
7. Enabled -> Is the Camera able to send video or
8. Thumbnail -> Snapshot of the Cameras line of sight
9. P&P Status ->Information about the status of the camera
   • Assigned, not initialized -> means that the camera was added to the account of a specific customer but has never been online. Happens when the integrator adds a new camera as a P&P and the camera is not connected to the internet at the time integration. This state will automatically be changed to Connected after the camera will come online for the first time.
   • Connected -> camera is fully registered and is either currently online or was online at least once after it was registered.
   • Initialized, not Assigned -> In other words camera was pre-registered. An integrator can register a camera in our system without adding it to a specific customer. This is most useful when you want to create a stock of ready to install cameras. After the camera is installed all that's left to do is to assign it to the specific customer and select a plan for it.
   • Ready ->  Legacy state, no longer in use
   • Registered -> Legacy state, no longer in use
10. Camera ID -> Unique Identifier for this camera
11. Video Status -> Currently Online or Offline
12. Registration Code -> The Unique Code to connect the camera P&P module to the VMS software
13. Assigned to -> Customer
14. Plan Name -> Name of the Current Payment Plan (If applicable)
15. Plan Type -> Type of the Current Payment Plan ( If applicable)
16. Modified At -> Last Time Changes were made to Camera Settings

CUSTOMERS CAMERAS TAB

1. Customer Camera Tab -> Used to see every camera currently attached to a customer account
2. Entries per page ->  Choose how many Cameras you see on the page, choice of 10/25/50/100 
3. Reset Filters ->   You can filter P&P Cameras by multiple types. This button resets those back to default 
4. Columns ->Choose which columns you can see on the P&P Tab 
   • Enabled -> See Below
   • Thumbnail -> See Below
   • Camera ID -> See Below
   • Camera Name -> Descriptive name of the camera chosen
   • Model -> Model Number of Camera
   • Http Access Url -> If a Generic or ONVIF Camera, link to access camera settings directly
   • Video Source Url -> If a Generic or ONVIF Camera, Link to access camera feed directly
   • Registration Code -> If P&P Camera, the Unique Code to connect the camera to the VMS software
   • Customer -> See Below
   • Video Status -> See Below
   • Camera Type -> See Below
   • Object Detection -> The chosen Advanced Analytics settings
   • FPS -> See Below
   • Bitrate -> See Below
   • Resolution -> See Below
   • Modified At -> See Below
5. Reset Settings ->  Resets Column Settings to default 
6. Refresh -> Refresh Page to see any changes
7. Enabled -> Is the Camera able to send video or
8. Thumbnail -> Snapshot of the Cameras line of sight
9. Camera ID -> Unique Identifier for this camera
10. Camera Name -> Descriptive name of the camera chosen
11. Customer -> The specific customer this camera is assigned to
12. Video Status ->  Online or Offline
13. Camera Type -> Generic Connection, ONVIF, or P&P Connection settings
14. FPS -> Frames Per Second Chosen for individual cameras
15. Bitrate -> The MBPS speed this camera is uploading at
16. Resolution ->  Image Size and Detail selected
17. Modified At -> Last Time Changes were made to Camera Settings

DELETED CAMERAS

1. Deleted Cameras Tab -> Used to track any cameras that have been deleted ever from the integrator account
2. Entries per page ->  Choose how many Cameras you see on the page, choice of 10/25/50/100 
3. Reset Filters ->   You can filter P&P Cameras by multiple types. This button resets those back to default 
4. Columns ->Choose which columns you can see on the P&P Tab 
   1. Camera ID -> See Below 
   2. Camera name -> See Below 
   3. Customer -> See Below 
   4. Camera Type -> See Below 
   5. Modified At -> See Below 
   6. Deleted At -> See Below
5. Reset Settings ->  Resets Column Settings to default 
6. Refresh -> Refresh Page to see any changes
7. Camera ID -> Unique Identifier for this camera 
8. Camera Name -> Descriptive name of the camera chosen
9. Customer -> The specific customer this camera was assigned to
10. Camera Type -> Generic Connection, ONVIF, or P&P Connection settings
11. Modified At -> Time and day the settings on this camera were last modified
12. Deleted At -> Time and day this camera was deleted