Incident Audio Talk-Downs
Use this guide to use any type of audio talk down on the site you are monitoring to communicate with people on site.
When inside an incident, if your action items ask you to Use Two Way Audio:
You can navigate to the Audio Button in the top right corner of your incident window!
Once you open this button, it will show you all the cameras at this site with talk down audio available!
Choose the camera that you are currently on to find the instructions for talk down:
Looks like this one is letting you know this camera has a built in speaker:
You can proceed to use the talk down button on the camera to speak to the people on site! 
Sometimes the Camera it lists is in fact a speaker that appears inside your cameras tab.
This device will appear offline but will still have the mic button to utilize:
This camera below, has a number to call:
This means the integrator set up a speaker so that if you call this number, it will allow you to talk through the speaker.
It looks like this camera, has a url:
Simply click on the url and be brought to the speaker's web access page and hit PLAY on whichever pre-recorded message is appropriate to use:
Once you have done this, check mark that you have completed the audio talk down feature and write a note describing your actions:
Related Articles
Escalating an Incident to ECC - Supplemental Alerts
Supplemental alerts allows us to send business name, address and a certain amount of notes to the ECC at the same time you're making the phone call. When you call in, it links in on their end the digitally transported text. Once inside the incident ...Incident Management - Levels of Disposition and Changing Disposition within an Incident
The DISPOSITION level category is based off of the event type the event is tagged with when you escalate it here on the Video Portal: The disposition level, priority and urgency can shift based on ongoing tickets happening when the armed site ...Incident Mangement - Assigning an Incident
Assigning an incident means that the event ticket has been passed onto the assigned operator and is currently being dealt with in accordance to the site’s previously set up SOP’s. To assign an open incident to an operator, simply navigate to the ...Closing an Incident
You can use the CLOSE INCIDENT button from your action buttons once inside an incident in the top right hand of your screen but you will be unable to perform this successfully until some actions have been completed. You will produce an error if ...Incident Close-out Record
When closing your incident as an operator, you will be asked to fill out a close out incident record. This will be your guide to properly filling this form out! When you are ready to close your incident and have gone through your incident close ...