Hikvision Push Modules and Firmware
Push modules are available for the following Hikvision camera series:
| Series | Firmware | Push module |
| G0 | download | download |
| G1 | download | download |
| R2 | download | download |
| R4 | download | download |
| R6 | download | download |
You can use this list to determine the model series of your camera: List of Supported Models
Next, to learn how to install our Push Module on your Hikvision camera, navigate to:
Install Push Module Hikvision in your knowledge base
Related Articles
How to Install Push Module: Hikvision Cameras
Make sure that your camera has the latest firmware! Take note only: R2, R4, R6, G0 and G1 series are supported. For full compatibility chart navigate to: List of Supported Models from your knowledge base If the camera was used before or the factory ...Uniview Push Module Installer
Uniview Compatibility List Your device may be compatible even if it is not on the list. Please contact us if you have a device that does not appear on the list. C1L-2WN IPC2122LB-DSF28KM IPC2122LB-DSF40KM IPC2122LR3-F40-E IPC2122LR3-PF28M-D ...Axis Camera Push Modules
Depending on the camera model and architecture a different version of the push module will be available. Instructions to determine the correct version of the push module for your camera can be found: determine camera architecture for axis cameras in ...Tiandy Firmwares with Pre-Installed Push Modules
To activate the push module on Tiandy cameras please download model specific firmware from the table below and upgrade your camera using it. For detailed instruction please visit: How to Add Push Module to Tiandy Cameras Model Download Link TC-C32KN ...Milesight Firmware with Embeded Push Module
To activate the push module on Milesight cameras please download model specific firmware from the table below and upgrade your camera using it. All 40 series cameras use the same firmware so the same file can be used for all models that belong to the ...