Explanation of EZ Tools Interface
The VMS process uses the EZ Tools for specific pieces of information
- Get IP
- Check not an LR series Camera (needs ONVIF connection, not P&P)
- Check Firmware
- Get the Registration code when needed after P&P Module added
Related Articles
How to Determine Camera Architecture for Axis Cameras
In order to determine which Push Module to use for your Axis Camera, you will need to determine the Camera Architecture. For newer Axis cameras go to System=>Plain Config Scroll down to Properties option: And look for System section and ...Local Security Gateway Setup Guide
Local Security Gateway Setup Guide Step 1: Connecting the Video Gateway Connect to Network: Using an ethernet cable, plug in the video gateway to your Local Area Network (LAN). Ensure that the network does not have a firewall preventing ...How to Activate ONVIF on the Camera Itself
For some cameras, a separate ONVIF user and ONVIF protocol have to be enabled for proper camera operation in our environment. Cameras from Axis, Hikvision, and some other manufacturers DO require an extra step when the camera is configured for use ...Configuring a static IP address on the Local Security Gateway
For the push module to work properly on the Local Security Gateway you can use both static and automatic IP addresses. Though for convenience a static IP address is recommended when Local Security Gateway is accessed remotely, this will allow you to ...How to Enable ONVIF on Hikvision Cameras
This guide is based on you knowing the IP address of your Camera. Summary: Enable Onvif on Hikvision cameras: Navigate to the camera IP address – Default IP is 192.168.0.64 Login in to cameras web interface. Go to Configuration -> Network > Advanced ...